Cicojoint® 200
Cicojoint®200 is a two part, cold applied, low modulus; polyurethane based elastomeric joint sealant.
Cicojoint®200 is formulated to accommodate continual cyclic thermal movement, and to resist sewage water, oil, hydraulic fluids, and remaining stable at constant exposure to high temperature, high humidity, and direct sunlight.
Cicojoint®200 is available in both pouring and gun grade, to suit horizontal and vertical joints.
Cicotile® Fix
Cicotile®Fix is one component; high quality; cement based adhesive powder that needs only water to be added before application. It is used to fix all kinds of ceramic and porcelain tiles permanently. It is composed of selected binders, graded fillers and other chemical additives, which enlarge the bonding capacity and obtain durability.
Cicotile®Fix is non sag tile adhesive so that it could be used for both vertical and horizontal applications.
Cicotile®Fix has long open time and successfully performing in dry climate regions.
Cicobitumen® WB60
Cicobitumen®WB60 is one component water based high solid content bitumen emulsion that when applied, obtains a damp proof protective coating. It gives a continuous barrier to the passage of water and water vapor. It dries quickly and acts as a protective and curing material for all cementitious substrates, masonry, and brick walls.
Cicobitumen®WB60 could also be used as a primer and adhesive for a wide range of torch applied bituminous membranes, and for under cladding works for facades.
Cicobitumen®WB60 could also used as a curing compound for the concrete which is supposed to be buried (like foundation) if coated just after the final set of the concrete takes place, and thus Cicobitumen®WB60 gives a free cost save for the project.
